求翻译,陶瓷

发布网友 发布时间：2024-10-23 22:48

我来回答

共1个回答

热心网友 时间：9分钟前

1, as you know, you have to specifications need to cut from the 1200*600, so the processing and product price plus the broken rate, this is we can offer the lowest price. 2, you need XX of anti-skid products report and related product data, we first because XX is a new product, so at this stage, we do a polishing surface skid resistance test, the other surface effects we didn't do. In view of new products, so the plane and pitted until X months of anti-skid report. As for the product structure, the following is the raw material for the project general: 1, powder 2, 3 ceramic sand, clay 4, pigment combustion rate is above 90% (the temperature is 1210 degrees) 3300*300 mosaic and 100*100 TILE, I don't know whether you there are requirements on the thickness? Whereas before 1000*450 specifications, price is according to the thickness of 12MM newspaper, so we must know the thickness of 300*300 we can determine how to give you a quotation. 4, in addition, for you the required XX series 200*200MM of each color of each surface model, first, we are only X color homogeneous X surfaces. Second, the X color is only 100*100MM small example, if you have to 200*200 specification, then we must arrange the cutting process, which can take up to three days.